3 Ways to Upgrade Vinyl Floors

3 Ways to Upgrade Vinyl Floors

Use these 3 simple techniques to breathe new life into your vinyl floors.



By: Amanda Palmer

Option 1: Paint. Get a few more years out your current floors by sprucing them up with paint. There is a method to it, but the results will last.

Materials
Painter’s tape
Paint roller (7-9 inches with a short, smooth nap)
Water-based primer
Porch paint
Ventilation
One weekend

Instructions

Registration

Become a member of P&G everyday and get exclusive offers!

Become a member
  1. Clean the floors well. Some people give floor a light sanding to remove years of grime and create a point of grip for the paint. This is optional
  2. Tape off the baseboards or corner beading
  3. Roll out one layer of water-based primer with a polyester roller. Let dry
  4. Give the floors a second coat after the first dries completely
  5. Tape down any stencils or striping you wish to use with painter’s tape, and then add a layer of base coat over the tape to prevent bleeding
  6. Apply the porch paint with a roller. Usually two coats are enough. Let dry
  7. Remove tape. Take a small artist’s paintbrush to touch up any bleeding marks

Tip: Begin at the farthest wall and work your way toward the doorway. If there are no windows, you can use a box fan to help with drying.

Option 2: Upgrade to peel-and-stick tiles. A simple refinishing of some new peel-and-stick tiles is a fast, easy way to make the floor look like new.

Option 3: Replace with new vinyl sheeting. There have been tremendous upgrades when it comes to vinyl sheeting. This is a perfect option for high-traffic areas (like by a side door or laundry room).

Do you have any inexpensive DIY ways to upgrade vinyl floors? Log in or register and share them in the comments below!

Complete your personal information

Please fill in the information marked with an asterisk to proceed; if you want to get tailored offers and content, don't forget to fill in the optional fields.