Cabinet Door Activity Center

Cabinet Door Activity Center

Create a magnetic activity center on cabinet doors for displaying artwork and more!


5 col

Difficulty: Easy

Materials
For the magnetic board:
(2) Used cabinet doors
(4) Metal sheets (thin, pre-cut)
Clamps
Drill
Drill bit 3/8”
Spring loaded nail set
(16) Self-taping sheet metal screws
(2) Door knobs
Pack of magnetic letters

For the whiteboard:
(2) Used cabinet doors
Whiteboard paint
Dry erase paint package (includes activator and base)
Foam rollers
(2) Paint trays
Pack of dry erase markers

Directions

FOR THE MAGNETIC BOARD:

  1. Remove the cabinet doors from the cabinet
  1. Position all 4 of the metal sheets 3 inches from the bottom of each cabinet

  1. Secure the cabinet with clamps and pre drill the corners with 3/8” drill bit
Registration

Become a member of P&G everyday and get exclusive offers!

Become a member

Expert Tip: Use a spring-loaded nail set before pre-drilling the corner. This gives a little hole that helps the drill bit and screw go in easier.

  1. Use the drill and the screws to bore through the pre-drilled holes in the metal. Repeat steps 2 and 3 for the second door

  1. Use the clamps to stabilize the table, change out the drill bit for one that matches the size of the knob, and attach the knobs by drilling from underneath

FOR THE WHITEBOARD:

  1. Next, combine and stir activator, base and the paint, and pour into the paint tray. Use the foam rollers to apply 2-3 layers on the doors without the metal sheets. Set aside for one hour

Complete your personal information

Please fill in the information marked with an asterisk to proceed; if you want to get tailored offers and content, don't forget to fill in the optional fields.

Let71

Let71

Reported

Thanks for coupons

  • Report it
Brenda

Brenda

Reported

Thank for the good deal

  • Report it
Top Picks Sweeps