Hula Hoop Sculpture

Hula Hoop Sculpture

This project adds a statement piece of art while adding a touch of nostalgia to any room.

5 col

Difficulty: Easy

(3) Hula hoops
Glue gun
3” Dry wall screws


1. Cut the rope to approximately 2 feet. Cut more rope if need be as you work your way around the hula hoop

2. Apply glue to the hula hoop and affix the rope tightly to the glue, wrapping it around the hula hoop until it is covered in rope


Become a member of P&G everyday and get exclusive offers!

Become a member

3. Cut the end of the rope, and add hot glue to the tip to prevent fraying. Glue the end of the rope to the hula hoop

4. To hang the hula hoops, use a drill and drill a 3” dry wall screw into the wall half way and hang a hula hoop on the screw overhang. Repeat for the remaining hula hoops, hanging them in a desired pattern on the wall

Complete your personal information

Please fill in the information marked with an asterisk to proceed; if you want to get tailored offers and content, don't forget to fill in the optional fields.